Description
Product Description
Installation Requirements
- The IS-M5 comes with a default horn antenna, Horn-5-45, and is compatible with the following options:
- Horn-5-30
- Horn-5-60
- Horn-5-90
- U-OMT-Dish
- 7 mm socket wrench or screwdriver
- Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
- Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the IsoStation and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
Specifications
| IS-M5 | |
| Dimensions
|
174 x 174 x 150 mm
(6.85 x 6.85 x 5.91″) 131 x 131 x 65 mm (5.16 x 5.16 x 2.56″) |
|---|---|
| Weight
|
725.7 g
(1.60 lb) 408.2 g (0.90 lb) |
| Beamwidth | 45° (Default Horn) |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| LED | Power |
| Max. Power Consumption | 6.5W |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter (Included) |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20 to 26VDC |
| Wind Loading | 36 N @ 200 km/h
(8.09 lbf @ 125 mph) |
| Wind Survivability | 200 km/h
(125 mph) |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Mounting | Pole-Mount (Kit Included) |
| ESD/EMP Protection | ± 24kV Contact/Air |
| Certifications | CE, FCC, IC |
| Operating Frequency (MHz) | ||||
| Worldwide | 5150 – 5875 | |||
|---|---|---|---|---|
| US/CA | U-NII-1 | 5150 – 5250 | ||
| U-NII-2A | 5250 – 5350 | |||
| U-NII-2C | 5470 – 5725 | |||
| U-NII-3 | 5725 – 5850 | |||
