Description
Product Description
Technical Specifications
General
Model • DGS-F1100-10PS-E
Interfaces
• 8 x 10/100/1000BASE-T
• 2 x 100/1000 Mbps SFP ports
Port Standards
• IEEE 802.3: Ethernet Media Access Control (MAC) protocol IEEE 802.3i:10BASE-T Ethernet
• IEEE 802.3u:100BASE-TX fast Ethernet IEEE 802.3ab:1000BASE-T gigabit Ethernet
• IEEE 802.3z:1000BASE-X gigabit Ethernet fiber） IEEE 802.3ad: comply link aggregation standard IEEE
802.3x: flow control
• IEEE 802.1p: About the traffic priority of the second layer of QoS / Cos protocol (multicast filtering)
• IEEE 802.1q: VLAN Bridge operation IEEE 802.1d:STP spanning tree IEEE 802.1s: MSTP spanning tree
• IEEE 802.1w: RSTP spanning tree
PoE
PoE Standards • IEEE 802.3af/at
PoE Capable Ports • Port 1-8 can support up to 250m @10Mbps with Extend Enable
Power Budget • 96W (30W max. per port)
Uplink Port Settings
From Port • Specifies the start port in the range for Uplink Ports. These are used for connecting the surveillance
VLAN with other switches.
To Port • Specifies the end port in the range for Uplink Ports. These are used for connecting the surveillance
VLAN with other switches
Network Cables • UTP Cat. 5, Cat. 5e (100 m max.)
Duplex Mode
• Full/Half-duplex for 10/100 Mbps
• Full duplex for 1000 Mbps
Performance
Switching Capacity • 20 Gbps
Transmission Method • Store-and-forward
MAC Address Table • 8K entries
Maximum 64 Byte Packet
Forwarding Rate • 14.88 Mpps
LED’s
Power ✓
System ✓
Physical/Environmental
Power Input • DC:12V 1A
Operating Temperature • 0°C ~ 50°C
Storage Temperature • -40°C to 70°C
Operating Humidity • 10% to 95% relative humidity no condensation
Storage Humidity • 5% to 90% relative humidity no condensation
Dimensions (L x W x H) • 225 x 120 x 35 mm
